Fusion Filament Spool for Bambu Labs AMS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified the Fusion Filament refill spool to work with the Bambu AMS
- Rating
- 4 / 5
- Likes
- 22
- Downloads
- 85
- Makes
- 3
- Views
- 1,495
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Public Domain
I modified the Fusion Filament refill spool to work with the Bambu AMS (https://thangs.com/designer/fusionfilaments/3d-model/Fusion%20Filaments%22).
This design makes the spool sides 200mm and tries to maintain enough thickness to be stiff. It took a few versions to get a spool to retract/reverse properly (see photo). I also cut the design into 4 parts for optimal print orientation (and a future smaller axel for FF's sample spools).
I've printed everything in Sport mode and did 6/4 bottom/top layers with a 30% grid infill. Choose what works best for you but remember that stiffness is key.
The area where the axel and spool side mate can be tight so a little filing/sanding might be necessary. I can adjust the tolerances but I prefer a tighter fit for rigidity.
Included is a 3mf with proper print orientation and the STEP files. Let me know if you have any feedback or issues.