TwoTrees laser - Silent cooling
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.36 – €0.44 net (excluding VAT)
For file: podlozka_0.2mm_PLA_MK3S_30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
With this reduction, you can use a 60mm fan from Noctua instead of the stock 40mm fan. Higher air flow, minimum noise.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 401
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
TwoTrees TT-5.5S laser - Silent cooling
With this reduction, you can use a 60mm fan from Noctua instead of the stock 40mm fan.
Higher air flow, minimum noise.
I used this reduction model as a basis.
You will have to extend the cables from the laser module by about 10 cm and solder the connector from the old fan to the new fan.
The original fan has a flow rate of 10.8 CFM, the new one has a flow rate of 17.2 CFM, while the noise level is only 19dB.
Used fan: Noctua NF-A6x25 FLX