Antique Well hand Pump Garden Fountain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small static Antique Well Hand Pump I designed to use as a Garden Fountain. The pump is probably around 8"…
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 193
- Makes
- 1
- Views
- 1,217
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is a smallstatic Antique Well Hand Pump I designed to use as a Garden Fountain.
The pump is probably around 8" tall and it mounts to a piece of 1" (I.D.) piece of PVC pipe so you can make it as high or lower as you want.
I used Super glue to join the parts and the bottom flange is also glued to the PVC. The Pump handle mounts to the pump with a few 6-32" screws and I think the flange screws/nuts are 4-40.
I did very little post process sanding so I painted it with Rust-Oleum Universal Antique Pewter Hammered Enamel Spray Paint to cover up the layer lines.
I used this Water Pump (https://www.amazon.com/gp/product/B01KLBNCGG) and a piece of 5/16 id hose to connect it to the Fountain. I have it hooked to a battery/solar panel/controller so it only runs during the day for a few hours while the sun is out.
See https://www.theneverendingprojectslist.com/3dprintingprojects/gardenfountain/ for more info.
If you have any questions or problems with the files or fitment of the parts just let me know and I will try to fix them.
Remember to tip your ~~waiters~~ designers if you like the service.... thanks for looking
Category: Outdoor & Garden