1 / 4
P3Steel bed auto-level and anti-shake — image 1
1 / 4

P3Steel bed auto-level and anti-shake

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This was the solution I designed to prevent bed shaking during acceleration movements and also get a fixed auto level…

Rating
0 / 5
Likes
0
Downloads
14
Makes
0
Views
225
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

This was the solution I designed to prevent bed shaking during acceleration movements and also get a fixed auto level solution (no need for software auto level) while still keep the spring suspension protection that was originally installed.

This is done by setting a fixed height for the table set by the printed parts. The original spring protection suspension is kept under the heated bed to provide the under support for the fixed height and the hotend collision protection.

Can be used in either 4 point or 3 point assembly option.

Print Settings

Printer Brand:

RepRap

Printer:

P3Steel

Rafts:

No

Supports:

No

Resolution:

0.25mm

Infill:

40%~60%

Notes:

Not much to say. Print it, use it.

Post-Printing

Assembly

1-Slide the printed auto-level mounts in the printer steel base bed.
2-Insert the spring (inside) in the printed auto-level mounts between the heated bed (bottom) and the of steel base bed (top).

3-Insert the M3 screw from the top hole, going through the spring and exiting the bottom.

4-Insert the M3 nut in the bottom. When tightening the nut should self lock in the socket.

5-Start printing. :-P

Category: 3D Printer Accessories

Tags