Retractable Nunchucks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a three part retractable nunchuck.
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 167
- Makes
- 0
- Views
- 1,638
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
This is a three part retractable nunchuck. It was made to be printed from the beginner printer that I got which has limited print space (10cmx12cmx10cm).
The chains are remixed from RobSoundtrack's Working Nunchaku
https://www.thingiverse.com/thing:2814960
I added a shortened 4 link chain as a personal preference as it felt more comfortable for me. But most people might want to use the 5 link.
Resolution:
0.35 for pipes, 0.2 for links and small parts
Infill:
33% for the pipes, 50% or above for chain and hook
Support is only needed for the chain printing, the rest of the pieces do not need support.
How to put together
- Slide the pipes into each other from small to large.
- Slide the hook lock piece onto the small pipe
- Add chain to the hook piece
- Snap the hook piece onto the smallest pipe
- Push the hook lock piece up towards the hook until it snaps into place.
- Snap the bottom cap piece to the bottom of the pipe. (glue recommended for this step)
- repeat for second piece.