1 / 3
Direct Drive Z Extension
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic z extension to get back the stock Z height after adding Direct Drive
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 22
- Makes
- 0
- Views
- 385
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Basic z extension to get back the stock Z height after adding Direct Drive
this is my first model I made and it might be simple but it works.
Uses the original screws for the z extrusions plus a couple m4 screws and tnuts
I used a .6 nozzle and .2 layer height and 2.4mm walls with 10% infill