Speaker Suspension from Ceiling
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.44 – €6.65 net (excluding VAT)
For file: Aufhaengung_Box_setD_0.2mm_PETG_MK3SMMU2S_6h27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.04 excluding VAT (range midpoint).
- Weight reported by the author
- 72 g
- Print time reported by the author
- 6.45 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Suspend your speaker (<4 kg) from ceiling. Suspended with springs, horizontally rotatable. Attaches with bayonet fixing.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 16
- Makes
- 0
- Views
- 594
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
For one complete speaker suspension you need:
[A] Printed parts
A.1 1x Aufhaengung_Box_HalterDecke_bajonett_male_v01
A.2 1x Aufhaengung_Box_HalterDecke_bajonett_female_v01_3
A.3 1x Aufhaengung_Box_TeilDecke_v00
A.4 1x Aufhaengung_Box_TeilBox_v00
A.5 8x Aufhaengung_Box_Spacer_v00prt_1
[B] Additional parts
B.1 4x M3x25 screw (Hex socket head)
B2 4x tension spring l=32mm, diameter=6.5mm, D≥3.5N/cm
Printing:
3d-parts can be printed without supports.
PET (or stronger) recommended.
Assembly:
[1] Assemble suspension with parts A.2, A.3, A.4, A.5, B.1, B.2
[2] Attach A.4 to speaker with 4 4.0x20mm screws (SPAX)
Center the part (left/right)
The distance from the back side influences the vertical tilt of the speaker.
(I measured the center of gravity of the speaker and positioned A.4 in such
a distance from the back wall, that a tilt of 20° resulted)
→ this needs to be evaluated for each type of speaker
[3] Attach A.1 to the ceiling (with 2 4.0x<lenght>mm screws / SPAX)
- holes spaced 45mm apart
- make sure the fixation can carry the weight of the speaker + cable
[4] Mount the speaker by locking A.2 on part A.1 (insert bayonet and turn clockwise)
while holding the speaker in position.
Hint: Connect speaker cable before mounting.
ATTENTION: The bayonet is not secured mechanically!
Make sure you do not accidentally unlock without holding the speaker!
[5] Adjust horizontal orientation of speaker by rotating A.3 accordingly.
ATTENTION: Hold A.2 in locked position to avoid accidental bayonet unlocking.