Toxic Coaster Set
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.27 – €1.55 net (excluding VAT)
For file: Toxic-Coaster-Holder-Drippy_0.2mm_PLA_MK3S_1h35m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.41 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.58 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Inspired by the Drippy Drum by @davemoneysign here is my Toxic Coaster Set
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 48
- Makes
- 1
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
Put the kettle on and brew yourself a cup of Toxic Coffee, just add two lumps of uranium and stir well.
Printed at .2mm layer height. Holder & Drippy 15% infill, Coasters 20% infill, no supports necessary, you'll need to flip the Drippy in your slicer. Does not require glueing, drippy should snap fit to holder.
Edit 21/09/2022 - It has been noted that the Drippy is slightly loose where the front cut out is to remove the coasters. The snap fit notches are not near the front cut out, if I get time to remedy I will otherwise you can glue if you wish to.
Time and weight is shown as 1 Coaster printed, print x6 coasters.
Designed in metric units, adjust in your slicer accordingly.
Please post pics of your finished model, give it a rating and show us your Toxic Coaster Set.
I try to keep all my designs free & don't wish to move to Printables Clubs, a small donation via my Buy Me a Coffee would be kindly appreciated.
All my designs and images used are not commercial free and are copyright of ©D3DCreative
By downloading my models you may not share any of the Images/STLs/GCode etc to any other persons or platforms e.g. thingiverse/makerworld
By downloading my work you agree to the above terms set out by me.