Gridfinity bins for Versastak drawer system (and Tstak)

Bins and baseplates are optimized to fit Craftsman Versastak drawers and DeWalt Tstak drawers. Fillets and some wall thickness were removed from the bins. Bins and baseplates were both modified to fit 8x3mm magnets instead of the weaker 6mm magnets. I'm a bit of a Fusion 360 rookie but the models print well for me on a CR-10 with .8mm nozzle in Polymaker Lite PETG. 

Note: For the Versastak drawers, you have to remove the ridges in the bottom of the drawers for the baseplate + bins to fit. I never cared for that system anyway so that's the first thing to go when I buy new drawers. A Dremel will do the job. I typically start with a sharp chisel (but not a precision chisel) and cleaned up the corners with a Dremel. You can even use a random orbital sander after removing them to smooth out the bottom. Just don't melt it!