Hammerhead Karoo 2 Spare Part Bracket Puck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spare Part Bracket Puck for the Hammerhead Karoo 2 Mount
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 76
- Makes
- 1
- Views
- 867
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
My mount for my Hammerhead Karoo2 broke and I printed the version from c10l, but recognized some necessary improvements to the fit of the Karoo2.
The tension of the PETG is a little bit increased by lifting the locking latch and I modified the fit of the latch itself. It should have less stress on the PETG overall than the original version. As you can see in the picture it sticks out a bit due to the necessary travel for the tension. I prefer more tension than having the part sitting flat on the mount.
Moreover I rely on thread forming of the M3 without any inserts. It's a faster fix to my problem and it should be fine, until the original spare part arrives. The next days ride is saved! No excuses :)
I used PETG, but i don't have any issues so far. It clicks very good and has enough tension with very minimal play. For strength I printed with 4 perimeters and 50% infill. Resolution 0.1mm.
Don't be surprised, I designed my own supports for the large overhang. They can be snapped right off.