1 / 7
Drainpipe connecter aka Nedløpsskjøtestykke
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connector to connect two pieces of Plannja drainpipe together.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed to connect two pieces of drainpipe together. More specifically to connect a pipe with an external dimension of 75mm to a pipe with an internal dimension of 65mm. Ended up designing a 2mm thick connector with external dimensions of 80.2mm (largest/top part) that narrows to 64mm (smallest/base part). Internal chamfer helps with both printing and water.
Printed in about 4 hours at 0.2mm layer height and with 20% gyroid infill.