COVID-19 Mask with Dechatlon Subea Snorkel and 3M particle filter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.01 – €8.57 net (excluding VAT)
For file: mohawk_filter_cover_02mm_pla_mk3s_7h40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.79 excluding VAT (range midpoint).
- Weight reported by the author
- 100 g
- Print time reported by the author
- 7.67 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
You can use 3M 5911 P1R or better 3M P3 particle filters with the SUBEA snorkel mask found in Decathlon.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 259
- Makes
- 1
- Views
- 4,321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
You can use 3M 5911 P1R or better 3M P3 particle filters with the SUBEA snorkel mask found in Decathlon.
It has a big valve to prevent moisturizing from breath the filters and bacteria deposition. The Air always flows in one direction, through filters, piston valve, your lung, out through subea mask valve.
Please read the print instructions,
the valve piston should be light as possible around 10g.
the adapter should be printed in contour to ensure good sealing performance and glued to the main housing so this way it can be detached anytime from the mask.
find old concept R1 step as well, it has a much smaller valve, if you want to test out the principle, or need adapter geometry for this mask
Print instructions
use G code, I used support only at the end of the housing in the area where the adapter comes, It was designed to be possible to 3d print easy