1 / 2
Oil change tube for emergency backup generator Honda EU20i
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tube for oil change - so you don't sow everything around the generator!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Had to change the oil at my Honda EU20i Backup generator and did not like to dirty it completeley! At YouTube I saw some videos that you could use a tube to change the oil.
But none of the tubes I got at home fitted and so I created an tube by my own.
The stl of the "tube" is completely solid filled and so I printed it back then at a Ultimaker with:
- 0.06mm bottom and top (top and bottom can be cut off after print)
- 0.8 wall thicknes
- 0% Infill...
- 0.1 layer hight
- 150 % speed
As alternative you can print vase mode…
Just refilled the generator and everything stayed clean!