1 / 12
Water tap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Several plastic parts and a pair of seals are needed for the construction. You can see how the valve works in the…
- Rating
- 5 / 5
- Likes
- 92
- Downloads
- 466
- Makes
- 2
- Views
- 2,298
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Several plastic parts and a pair of seals are needed for the construction. You can see how the valve works in the video. The valve is primarily designed for plastic canisters 10l,15l.... Lid for canister is currently not modeled, and is necessary drill 25mm hole to original canister lid.
Plastic parts:
- main
- valve
- nut
- screw
- air (optional I have better result without this part)
Seal parts:
Printer settings:
- PLA filament
- 0.4 mm Noozle
- 0.2 mm quality
- Support required only for main