Burt's Bees Lip Balm (Chapstick) Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.21 – €0.25 net (excluding VAT)
For file: chapstick_0.2mm_PLA_MINI_19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.23 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 19.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple two part design to attach Burt's Bees' Lip Balm (Chapstick) to keychain. The top plunger portion allows removal
- Rating
- 5 / 5
- Likes
- 345
- Downloads
- 1,496
- Makes
- 6
- Views
- 5,533
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
After creating some more complex models/containers with threaded attachments and supports, finally came up with this simple and less bulky design.
The smaller cap goes into the larger portion. The larger part attaches to the top of the Burt's Bees' by friction with a snug fit (printed at same inside diameter of 15.72mm). The top cap then acts as a hole for the keychain and can be used with slight force to push the chapstick off of the holder. If your chapstick is a different diameter, you can likely scale the models up or down slightly to get a snug fit. The keychain hole is 3mm diameter and fits the keychain shown really well. Smaller keychain preferable if you want less bulk.
Printed at 20% infill, no supports needed. Print with flat sides down.
Update 10/10/2025 - I had some cracking issues with original design as it had fairly thin walls. I have updated the “bottom” file with thicker walls and included in the files. I've been using this on my keychain for awhile with no issues of cracking.
Update 10/31/2026 - I recently discovered that there is a Burt's Bees Mini!!!!! This is perfect for a minimal keychain, but I found the diameter was a little smaller than the standard size tubes. So I've updated and added a new file (Chapstick_Thick_MiniVersion) that includes both parts. I added a photo that compares standard and mini, just note my filament needs drying so the parts came out a bit meh, but still functional!