Rasberry Pico Osu Keypad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom made Osu Keypad based on the Raspberry Pico using KMK.io frimware
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 74
- Makes
- 0
- Views
- 1,093
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
I couldn't find an Osu keypad using the Rasberry Pi Pico so I designed my own using mechanical switches
To build this you will need 2x Cherry Mx or equivalent switches, 2x 1N4007 diodes, 4x M3x12 screws, a Rasberry Pi Pico and some thin coated wire.
For the firmware, I recommend using KMK it is relatively simple to set up here is a link to their guide
For wiring, the keypad read through the QMK guide , in the end, it should look something like picture three but attached to the pins you chose in the firmware
For keycaps, I used some Keycaps off my keyboard or you could print these ones on Thingiverse
Printing:
0.12 mm layer height