1 / 2
Super Simple Desk Clock / Super einfache Schreibtisch Uhr / Bahnhofsuhr
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pretty simple, just three parts and a clockwork (55x55mm)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 42
- Makes
- 0
- Views
- 474
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- Print all three parts, no support needed.
- Design a clock-face (center hole 9mm, outer diameter 124mm
- Glue the clock-face into the back part
- Glue the stand under the back part - I used silicone, worked well but needs time to cure
- Fix the 55x55mm clockwork into the housing - some washers may be needed to get the clockwor as far back as possible.
- Mount the hands that come with the clockwork - you may need to shorten them
- optionally use some transparent plastic sheet (I took an antique overhead slide) to cut out a front glass pane
- fix the front glass pane with the design ring or - if you don't use a pane - just mount the ring