Powercell lights holder (Shell mounted)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This light holder is designed to fit a GBFans light kit, which is available…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 13
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This light holder is designed to fit a GBFans light kit, which is available here: https://www.gbfans.com/shop/electronics/power-cell-cyclotron-light-kit/
The holes to attach it to the shell are for M6 bolts.
The holes on top are for M3 inserts (for the GBFans kit) and the hole at the bottom is for a M4 insert (to adjust the angle).
Inserts can be found here: https://www.amazon.fr/stores/ruthex/page/49FE6CE6-BD00-473F-BAEF-B69692F26A36?ref_=ast_bln
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
100%
Filament: Verbatim PLA Black
Notes:
You can either use supports or bridging.
Category: 3D Printing