Proton Pack L-Bracket (GB1 & GB2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
L-Brackets I made using these references from GBfans.com: -Pictures of the screen used props by Andy Rayonez and…
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 45
- Makes
- 0
- Views
- 407
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
L-Brackets I made using these references from GBfans.com:
-Pictures of the screen used props by Andy Rayonez and thegreatgalling.
-Aproximate dimensions mentionned in a forum from GBFans.
-Stefan Otto's plans.
The holes are 4mm pilot holes, feel free to make them larger if you need to.
The large L-Brackets are for the Injector tubes while the small one is for the Booster tube / Ion arm. Only one is needed for each.
Update 31/01/2021: Made the base of the brackets 3mm longer.
Update 01/06/2021: Added small L-brackets for the Ion arm / Booster tube.
The L-Bracket was used to add more sturdiness to the injectors tubes and Ion arm used on the Proton Pack. I would recommend actually having them custom cut and bent in aluminum.
Link to GBFans: https://www.gbfans.com/
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
100
Filament: Doesn't matter PLA but ABS recommended Doesn't matter
Notes:
If printing in PLA, I would recommend coating the part in 3DGloop or epoxy, to make it stronger.
Category: 3D Printing