1 / 4
Wood Lathe Screw chuck cover & box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protects face and screw of my 4" screw chuck. Has box for more screws
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 332
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This box cover will protect the face and center screw of my 4" screw chuck. It has box for more screws in it.
When I printed I used no supports and the center came off and the bottom was ugly. I plastic welded it together and melted more PETg into it to fix it. I remade the model to prevent that and it should now print with no supports (box side down) But I did not print a 2nd to test as I only needed one.