Distribution Box for 12V solar setup with Voltage indicator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
i have a solar setup in my house. this is a little box meant to distribute power into a room.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 21
- Makes
- 0
- Views
- 272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
this is to enable me to wire a cable to a bedroom and then have this box on the wall to monitor the voltage and plug things in near a small bedside cabinet. very useful! i can plug in a fan, lights, 5V charger for phones and things. i can also watch the voltage to see if the battery is getting low in order to stop drawing power before the solar controller decide to stop the power by itself. i mounted a switch in order to turn ON/OFF a specific post (the green one) very useful for a ceiling mounted fan.
in order to facilitate the mounting of the different element there is a cut-out in the back to reduce the thickness to 2mm. the inside space is approximately 95mm X 45mm.
this is made for :
- a voltage monitoring segmented LED board (23mmX14mm)
- 4X banana post needing a hole of 8mm
- a switch with a shaft of 6mm
- 4 small screws
you will need to drill your own holes for the wires that come IN and OUT of the box.