1 / 1
Prusa face shield Bottom Reinforcement for large nozzles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I thickened the sides of the bottom reinforcement to allow for two clean passes with larger (>0.5mm) nozzles without…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 212
- Makes
- 0
- Views
- 1,260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
I thickened the sides of the bottom reinforcement to allow for two clean passes with larger (>0.5mm) nozzles without strange artifacts.
Works well with 0.8mm nozzle and no infill.
Print instructions
Working great with 0.8mm nozzle in PETG with no infill.