1 / 4
Voron Can Bus z-chain move
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Doing the can bus conversion I wanted to move the z chain to below the gantry to be more out of the way, using x/y chain
- Rating
- 4.949 / 5
- Likes
- 581
- Downloads
- 3,884
- Makes
- 47
- Views
- 21,312
- Reviews
- 39
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
After doing the can bus conversion on my Voron I found that the z chain was too close for comfort to the back of the can bus board.
To this end I decided to re-use one of the x/y chains to just pass the A/B motor cables up.
Obviously, this requires use the modified klicky mount - but why wouldn't you be klicky?
Update:
Well to answer my own question there is now TAP, so I've added a “No Mount” option.
Updated heatset insert size to “standard” 4.7mm