AR-15 Bolt Face logo print modifier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AR-15 Bolt Face logo as a thin model, used as a modifier in your slicer software to add the bolt face to another print.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 155
- Makes
- 1
- Views
- 890
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
In PrusaSlicer, for example, you can add it to your shape gallery. It can be used in a number of different ways:
- Add as a "part" to emboss the logo onto a flat surface.
- Add as a "negative volume" to deboss the logo.
- Add as a "modifier" to print the logo in a different colour.
These same manipulations could also be done in the mesh editor of your choice, but I find it quick and easy to just do it in PrusaSlicer.
The model is 0.4mm thick, and approx. 100mm x 100mm. Scale it in your slicer to match your model.
Example shown is Samsung S10 Case by Christianoid, with the bolt face applied as a modifier on the bottom two layers, to render the logo in a different colour.