ClosetMaid Shelf Clip Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer to secure a ClosetMaid shelf clip to a wall.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I was having trouble installing a wire shelf in a closet, as the corner isn't square. As a result, one of the wall clips couldn't reach the drywall. I made this spacer so that I could get a solid connection with no wiggles in the shelf.
It's scaled to a 6mm height, since that's how much I needed for my shelf. If you need more or less height, change the scale in your slicer. Just make sure your screws get solid purchase in the wall/anchors.
Print Settings
I suggest using three outer walls so that it doesn't get crushed when you tighten the screws. Infill doesn't really matter since all the pressure is on the screw holes.