Tileable Ramp V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a random thing I decided to make a while ago and never got around to uploading. It's a tileable ramp with a…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 75
- Makes
- 0
- Views
- 490
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Just a random thing I decided to make a while ago and never got around to uploading. It's a tileable ramp with a hexagonal texture on the surface that I originally designed for the lip of the garage under the door but never used. I've gone back through the model and cleaned it up a bit, fixed some tolerance issues and now it should be printable and ready for use, though I currently have no plans to print it myself as I no longer have a need for it.
Print Settings
Printer Brand:
Anycubic
Printer:
Large Size Chiron
Rafts:
No
Supports:
No
Infill:
Recommend high infill percentage for load-bearing prints.
Filament:
Any Any
Any
Notes:
If you intend to use this for a load-bearing application, I recommend using connected infill lines with a very high infill percentage. PLA isn't the strongest material, but a dense enough block of it will hold a good amount of weight.
Category: 3D Printing