CubeAnet 8 Chimera Water Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the original E3D V6 mount from CubeAnet 8 As the enclosed chamber of my CubeAnet makes PLA melt,…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a remix of the original E3D V6 mount from CubeAnet 8
As the enclosed chamber of my CubeAnet makes PLA melt, where it should'nt. So i decided to use water cooling for the hotend.
To build this you need a couple of M3 screws in several lenghts.
Some of the nut inserts has to be pushed in while hot to ensure, they won't come out again.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
Yes
Supports:
Yes
Resolution:
0.24mm
Infill:
60%
Filament: Sunlu ABS black
Notes:
Printed on my AM8 with 240°C on the nozzle and 105°C on the bed in an unheated chamber. I use 6 perimeters and 3 top and 3 bottom layers to provide the stiffness required
Category: 3D Printer Extruders