LEGO UCS GUNSHIP (75309) WALL MOUNT
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An angled wall mount to allow you to mount the Lego UCS Gunship (75309).
- Rating
- 0 / 5
- Likes
- 53
- Downloads
- 1,085
- Makes
- 2
- Views
- 5,390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
An angled wall mount to allow you to mount the Lego UCS Gunship (75309).
This set is notoriously difficult to display due to its large wingspan. This mount utilizes the Lego's original stand mounting location in the floor of the ship, so no modification is necessary. Just simply set the Lego on the stand and you're good to go!
The mounting holes are sized to accommodate #8 screw size (4mm diameter).
If mounting to drywall, I recommend using a 75lb anchor for each hole just to be safe. I used the ‘EZAncor’ Drywall Anchors which can be found at Home Depot