BTT UPS 24V V1.0 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a basic box to enclose and mount the BTT UPS 24V v1.0, knowing me I have probably over engineered this ;) To…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 100
- Makes
- 0
- Views
- 509
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Just a basic box to enclose and mount the BTT UPS 24V v1.0, knowing me I have probably over engineered this ;)
To secure the base part to extrusion use 2x M3x8mm machine screws with 2x M3 T nuts, maybe a thin washer too.
Fit the UPS to the top plate using 4x M3x5x4.2mm threaded brass inserts with 4x M3x8mm machine screws.
Power and signal cable can be connected to the UPS & fed through the cutouts in the base part.
This top plate is then fitted upside down on to the base part using 4x M3x5x4.2mm threaded brass inserts with 4x M3x10mm machine screws.
The enclosure can be mounted either side as I have allowed holes for that or if you need to have the cables entering from the front of your printer, mine exit at the back and I have my enclosure mounted under my bed.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50
Filament: Sunlu PLA Blue
Category: 3D Printer Accessories