35mm Slide Filament Samples Box Vase/Spiral mode
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box printed in vase/spiral mode for slide filament samples allowing fast, light and translucent print.
- Rating
- 5 / 5
- Likes
- 47
- Downloads
- 180
- Makes
- 11
- Views
- 1,638
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
As it is, it holds 40 filament samples. If you want a smaller box, place it in your slicer with the latching part in the bed and cut it where needed. For 1 slide, the cut height is 7.60mm and 3.80mm for every slide requiered. For instance, a 10 slide box needs to be cut at 41.80mm (7.60 (1) + 9 * 3.80).
**It is designed to be printed with a 0.4mm nozzle. As spiral mode hollows the object, printing it with different size nozzles to the one it was disegned for, will affect the tolerances. Since they aren't tight, printing it with a 0.6 nozzle might work but I haven't tested it.