Level Adapter for Gamma X-Stringer X2 Stringing Machine
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.23 – €0.28 net (excluding VAT)
For file: Level Adapter v0.7_small_0.2mm_PLA_MK3S_22m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.26 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 21.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
These are 2 versions of a bubble level adapter for the Gamma X-Stringer X2 stringing machine. To ensure consistency of…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution
These are 2 versions of a bubble level adapter for the Gamma X-Stringer X2 stringing machine. To ensure consistency of the pull, the lever of the stringing machine should be dropped parallel to the ground every time. Experienced stringers can do this, but beginners (like me) can use one of these adapters to get visual confirmation that the lever is correct.
This adapter is for a bubble level from TV mount, which has outside diameter of 7.7 mm. The adapter is installed at the end of the lever of the stinging machine after the black rubber cap is removed. If needed the level can be glued to the adapter. but I need it removable for storage.
It is a personal preference which adapter to use - they are functionally identical and the only difference between them is visual: the small one looks like an extension of the lever, where the large one looks like a replacement cap.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S+
Rafts: No
Supports: No
Resolution: 0.20
Infill: 15%
Filament: Prusament PLA Silver
Notes: I printed the adapters in PLA, but the material doesn't matter.
The provided STL files include the two adapters in one STL and each adapter separately.
Update 2022-09-26: New version with tighter and better fit.
Update 2023-06-27: Added .gcode files