1 / 1
Card trays for Machi Koro boardgame
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These interlocking trays keep your table nice and neat while playing the great board game Machi Koro!
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 97
- Makes
- 0
- Views
- 922
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These interlocking trays keep your table nice and neat while playing the great board game Machi Koro!
Print instructions
I printed these with 0.20 mm layer height, 15% infill and no supports. They don't need to be very strong but there will be a little bridging necessary.
There are three model variations:
- MachiKoroTabsTR has tabs on both the top and right side of the tray. These tabs loosely connect with an adjacent tile to keep things neat. If you don't care about the extra tabs on the top and right of your grid of cards, print of 15 of these. If you use the other three variations too, just print 8 of these.
- MachiKoroTabsR only has a tab on the right side of the tray. These are nice to use for the top row in the grid. If you want to keep the border of the grid clean, print 4 of these.
- MachiKoroTabsT only has a tab on the top of the tray. These are nice to use for the right-most column in the grid. If you want to keep the border of the grid clean, print 2 of these.
- MachiKoroNoTabs has no tabs at all. If you want to keep the border of the grid clean, print 1 of these for the upper right corner of the grid.