1 / 5
Dummy podcast mics, props
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial
A dummy prop mic for podcast. It uses standard gopro arms. You can use any lenght or type. I included the microphone, the U bracket, two types of Gopro extension arms and the table foot.
You will need a M6x60 screw with nylock nut and M5x30 screws and nuts fot the arms.
By using the caps you will hide the screws and nuts but also use those too tighten and loosen the joints.