Skådis Anker USB hub holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hold the Anker USB hub holder securely against the Skådis.
- Rating
- 0 / 5
- Likes
- 71
- Downloads
- 104
- Makes
- 0
- Views
- 1,583
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Disclaimer: This model use @Xuis delightful Skådis T-Clip System, go check his page!
I wanted a clean way to access USB-A ports without having cable running across my desk.
This holder make this possible.
I've used the Anker USB-A hub 4 ports and routed cable behind the Skådis, but you can also route the cable in front if you'd rather not risk your hands or the USB port.
To route the cable I've carefully pried the USB cap with a sharp cutter blade, then I trimmed the plastic surrounding the USB and routed the cable through one of the Skådis hole, once that was done I clipped back the USB cap around the USB plug.