1 / 3
Spool Holder for Lack Enclosure — image 1
1 / 3

Spool Holder for Lack Enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

If you have the Ikea Lack Enclosure and you like to put the filament spool inside the box, this is your design!

Rating
4.8 / 5
Likes
59
Downloads
232
Makes
4
Views
1,085
Reviews
5

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Designed to be used in the Ikea Lack enclosure, with the filament spool inside the box.

The concept is very similar to that of the Prusa enclosure, with the filament spool inside the box, if you need a filament guide, I've make this remix.

I did some tests, the model supports about 5 kilos without problem and collapses with about 7 kilos, so for filament rolls there will be no problem.

You will need:

  • Super glue or a glue of your preference.
  • 4x 22mm wood screw (I've used a few dry wall screws and worked perfectly)

To assembly the parts, the model has a lock system integrated, but you will have to put some glue on the joint.

I'm still working on my Lack enclosure, finishing building custom parts for various functions, such as an accessory for the led light diffuser and VOC filter.

I've printed the parts on PETG, the same configuration for printing as Prusa use on most parts.

Update: v2 use less material and optimized to have more room in the enclosure.

Tags