1 / 5
Pegboard wall mount with misalignment compensation
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this mount you can compensate the position inaccuracy when drilling into brick walls ;-)
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 77
- Makes
- 3
- Views
- 891
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When I was planning to mount my Skadis pegboard onto the wall in the garage, I discovered, that it is quite hard to drill the holes in the exact correct position.
The Skadis pegboard already offers a compensation in the vertikal direction, so I just needed a idea to compensate the horizontal direction.
And here you can see the result !
Please let me know if the part was helpful for you.
Step by step:
- drill the holes for you pegboard into the wall
- put in the dowels
- mount the cylindrical part to your dowels
- align them in what way you want to have a compensation
- put in the sliders
- mount your pegboard
- align and tighten the machine screws
BOM:
- M5 Nuts (4x)
- M5 oversized washers (4x)
- M5 Screws (4x) *M5x20 when you use a Skadis
Print settings:
Cylinder
- wall count / Konturen → 4
- infill 20%
- layer height 0,2 “QUALITY”
Slider
- infill 100%
- layer height 0,2 “QUALITY”