1 / 3
19 Shot Absolver for 2.5" PVC Fittings
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated: Barrel size has been increased to 13mm for a better dart fit and shell OD has been decreased slightly to 72mm…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated: Barrel size has been increased to 13mm for a better dart fit and shell OD has been decreased slightly to 72mm for tolerances in 2.5" PVC fittings. There are two versions:
- 19shot_13mm_shell_insert - Just the barrel pieces. For if you have a material you would like to make your shells out of and just want to print the bare essentials. 69.8mm at the widest point, so these will be quite loose in 2.5" fittings.
- 19shot_13mm_shell_capped - Has a 10mm tall circle at the bottom meant to be a fairly close fit in 2.5" fittings. Should be everything you need to just print and use the shells in a fitting.
A basic 19 shot absolver shell for when you need to shoot ALL the darts at one time. Made to fit in 2.5" PVC fittings, you'll need one hell of a blaster to make proper use of this. Barrels are .490" diameter compared to CPVC at .485". Print is currently untested.
Category: Toys & Games