1 / 5
Metric 1-8.5mm drill bit holder with SKADIS pegs — image 1
1 / 5

Metric 1-8.5mm drill bit holder with SKADIS pegs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€0.42 – €0.51 net (excluding VAT)

For file: Skadis Drill Holder-4_0.1mm_PLA_MK3S_36m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.46 excluding VAT (range midpoint).

Weight reported by the author
3 g
Print time reported by the author
36 min
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Model split into two parts for easier printing.

Rating
4.5 / 5
Likes
25
Downloads
198
Makes
2
Views
1,397
Reviews
2

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

Holds your essential metric drill bits.

Printing Base

  1. Supports needed for pegs
  2. Recommend creating a modifier to increase infill around the pegs for better strength. I went to 100%
  3. Once printing is done, you may need to drill out the holes to the right size…. 2.5mm bit to the 2mm hole, etc., so the bits fit in nicely.

Printing Number Strip

  1. I printed at .1mm layer height with a .4 nozzle. .25 or smaller would probably make the numbers much more crisp.
  2. Insert a color change at 2.5mm for the numbers

Assembly

  1. Glue the strip to the base.
  2. Hang with caution. These pegs are tight!

Tags