Scraper for Build Plate - Version 2
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.41 – €0.50 net (excluding VAT)
For file: half-scaled version for MINI / scraper2_02mm_petg_mini_30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.45 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 30 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This scraper can be safely used on the build plate with little danger of scratching or gouging the coating.
- Rating
- 4.897 / 5
- Likes
- 1,342
- Downloads
- 9,410
- Makes
- 341
- Views
- 36,950
- Reviews
- 339
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Note added Oct. 5, 2021 : As some people have had problems printing this without infill, I have added files for 15% rectilinear infill.
This scraper can be safely used on the build plate with little danger of scratching or gouging the coating. This was inspired by a similar print by Tor G, but I decided to create a new 3D model. My design uses the same basic features as Tor G, but I widened and lengthened the handle. This Version 2 uses much less filament than my Version 1 and prints 30% faster, but is a little more flexible.
See also Version 1 for my first design with internal ribs.
I should add that the Tor G design is very good and worth a look; I just enjoy creating my own models (and I need the practice!).
The OnShape 3D CAD file for this are available here:
Print instructions
Note added Oct. 5, 2021 : As some people have had problems printing this without infill, I have added files for 15% rectilinear infill.
Print flat side down with 0% infill. The internal structure is hollow, with three ribs to strengthen the blade (see the photos which show printing in progress). I rotated the print 45 degrees to get it to fit on the build plate.
I printed in PETG on a textured plate. It would probably work in PLA as well for many uses, as long as you keep it away from high temperatures.