Knaus ventilation plugs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plugs for the forced ventilation openings at the entrance of a Knaus Van TI motorhome
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 105
- Makes
- 1
- Views
- 766
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I created those plugs to reduce the amount of heat loss during cold days while I'm not in the RV.
Hence the bright color, so I won't forget to take them out while I'm inside the Motorhome.
They fit snuggly into the openings.
I've printed them with PETG, but anything should work fine.
The cord is about 4.5mm in diameter, the knot is a sheet bend: https://en.wikipedia.org/wiki/Sheet_bend
Update: I've added a version which doesn't require cord, it's a two part design with a handle that snaps in place.
Printed in PLA on my printer the two parts need some force to join, but are then very firmly connected.