MINI bag clip
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.84 – €1.03 net (excluding VAT)
For file: Print orientation, Support Structures, 3Perimeters / cam_clip_3_minitol_015mm_pla_mk3s_1h13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.94 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 1.21 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a 40% scaled down version of my other clip.
- Rating
- 4.64 / 5
- Likes
- 415
- Downloads
- 3,837
- Makes
- 35
- Views
- 21,944
- Reviews
- 50
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU General Public License v3.0
This is a 40% scaled down version of my other clip. Some modifications were made to conserve the correct clearances after scaling. This version is can be pretty hard to print, and is likely very weak. It's mostly just for fun.
If you're looking for an actual clip that can hold stuff, check out the original.
Horizontal gaps are just over 0.1mm after scaling, so you'll need a pretty good printer to get all the parts moving.
Print instructions
Supports should be set to "Support on build plate only".
0.15mm layer height should be used.
If you're using the STL, you'll have to scale it down to 40% yourself.
You might have to use a brim if it starts to curl off the print bed.