Sewing machine thread cutter add-on
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: Fadenabschneider_0.2mm_PLA_MINI_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.17 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 10.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This little model adds a handy little thread cutter to any sewing machine or wherever you decide to place it.
- Rating
- 5 / 5
- Likes
- 148
- Downloads
- 354
- Makes
- 3
- Views
- 2,391
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
You'll need: one break-of segment of a 9mm, 30° utility knife blade and some strong double sided tape or better: adhesive foam pads. These work perfectly.
The blade segment is captured in the print, so you'll need to add a print pause in your preferred slicer one layer prior to the bridging bit, where the cavity gets closed of.
When the pause is there, don't take the print plate of the printer, or it will cool down and the print will loose its bed-adhesion (I've done that mistake…). Simply lean into your printer while it is paused and place the blade segment in the recess. Make sure to slide the pointy end as far forward in the recess as possible.
I also added one small dab of CA-glue under the blade segment just to stop it from potentially moving about in there. Then continue printing and when done use adhesive tape or something similar to add it to your sewing machine or wherever you might use it. :)