gridfinity 1x1 bin vase mode repeated print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
gridfinity 1x1 bin vase mode for 1mm nozzle with optional repeated print using M808
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 211
- Makes
- 7
- Views
- 1,682
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
LittleHobbyShop's 1x1 vase mode gridfinity bin is a nice little bin. This model is a modification that allows you to print with 1.0 mm wall thickness. This makes the bin a bit sturdier but still tiles nicely.
Attached is a hand crafted gcode-file that repeats the print when its done, clearing the build plate in between. For this to work you need a build plate that releases the print when it cools down, such as glass. printables does not support the G-code that is used for looping, M808, so it is commented out in the .gcode-file. In the .gcode, some minor optimizations are made, such as pre-priming and slowing down when printing the upper rim.