1 / 1
DtM Face Shield with wraparound arms
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the DtM Face Shield. Due to elastic shortages we have included wraparound arms in the design.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 76
- Makes
- 0
- Views
- 459
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Masks
- License
- Creative Commons — Attribution
This is a remix of the DtM Face Shield. Due to elastic shortages we have included wraparound arms in the design. Fits most heads and can be tensioned in the back using basic supplies such as office rubber bands or hairties.
Print instructions
PREFERRED PRINT SETTINGS:
Layer Height: 0.3mm or finer
Shells: at least 3
Infill: 30% or higher
Infill Type: Grid
Speed: 60mm/s or slower
Due to size of the design, print on a large-format printer: CR10S, Taz 6, etc. You can scale it down to 99% to fit on a Prusa Mk2/Mk3.