Dremel Pet Nail Grinder (6mm Opening)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an upgrade to the ridiculous battery powered ones that stop as soon as your pets nail touches the grinding area.
- Rating
- 4.6 / 5
- Likes
- 34
- Downloads
- 178
- Makes
- 5
- Views
- 985
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this as I was fed up with the awful battery powered variants that just didn't have enough power if a little too much pressure was used.
It was made so that you can use either the original Dremel Collet Chuck or a Multi Quick Release Chuck, along with the standard 13mm Drum Sander or the Dremel SC407 EZ SpeedClic Drum.
Just align the drum with the holes so that your pets nails don't get trapped on either side of the drum, by holding the piece next to your dremel and adjusting the length on the shaft of the drum up and down until it's aligned.
I generally use an 80 or 120 grit depending on how long my dogs nails are. And only take off 2-3mm at a time so as not to get too close to the ‘Quick’ or blood supply in the nails. Leave it for 2 or 3 days and maybe only take the nail back a further 1-2mm at a time. Repeat this until you feel they are at the correct length. Please don't take too much off in one go!
If you have found this useful, please like and possibly leave a comment as well as posting your make.