1 / 3
Oval Tube End Cap MajOD80mm MinOD40mm — image 1
1 / 3

Oval Tube End Cap MajOD80mm MinOD40mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Endcap for oval tube with the major outer diameter of 80mm and minor outer diameter of 40mm, 2mm wall thickness.

Rating
0 / 5
Likes
9
Downloads
132
Makes
0
Views
416
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Created to replace the endcap for a metal oval tube with a 2mm thickness, a major outer diameter of 80mm, and a minor outer diameter of 40mm. 

I ended up having to scale my print to 101% to get an acceptable fit. My 100% model would slide in/out without any force. At 101% it snapped in and required mild prying to release. The model is exact and in reality small tolerances between the part and tube added up to a loose fit. I will include a few different "percentage" models for ease of use. I would recommend starting a little larger as you can always trim down parts a bit. 

I believe it could be scaled to fit many different dimensions.