1 / 6
Arrow Fletching and Nock for 5/16" Wood Dowels — image 1
1 / 6

Arrow Fletching and Nock for 5/16" Wood Dowels

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed from scratch with thinner vanes and a 3" deep hole to fit a 5/16" wood dowel (Home Depot). Vane is about 3…

Rating
3.5 / 5
Likes
81
Downloads
624
Makes
2
Views
1,644
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution

Designed from scratch with thinner vanes and a 3" deep hole to fit a 5/16" wood dowel (Home Depot).

Vane is about 3 3/4" long.

I recommend increasing printing flow to 102% as I've experienced a bit of underextruding.

I recommend attaching it with shrink tube in the front a dab of hot glue or super glue on sides. The hole is cone shaped to allow sharpening of the dowel for a better stability.

I'm not an archer, I designed it from online fletching guides.

I will add other vane designs upon request, I have no idea what design works best.

UPDATE 5/20/2019:

Added 2 degrees angle to vanes. It should increase accuracy and stability.

Also improved vanes' shape.

Added seperate model of the fletching only for flexible filament printing.

5/23/2019:

Added a fletch with no nock that can be printed in vase mode in less than 40 minutes.

I have NOT tested it yet.

Nock is too wide, I will fix it soon.

Print Settings

Printer:

Ender 3

Resolution:

0.2mm

Infill:

12%

Filament:

Solutech PLA

Camo Green


Notes:

Printed at 50mm/s with 6mm raft extra margin, 102% flow, 4 wall line count.
Fletching seems to be a bit brittle printing at 200 degrees, I'll try printing at 210 to strengthen layer adhesion.

I suggest stopping the print at 5 or 6mm to check rod diameter fit. Scale in your slicer accordingly.

Category: Sport & Outdoors

Tags