Modular "Pipe" Battery-Pack for 4, 6, 8.. or more AA Cells
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a very compact modular battery pack which fits into a 32mm plastic (electro installation) pipe. It is devided…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 45
- Makes
- 0
- Views
- 725
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a very compact modular battery pack which fits into a 32mm plastic (electro installation) pipe. It is devided into segments which can be added to a pack of 4, 6, 8... or even more AA-batteries. It is great for building lightweight, compact and tough battery packs. With watertight pipe plugs it can be used for outdoor and underwater equipment.
The single segments will be fixed on a M3 threaded rod which makes the construction simple but strong.
The pack was originally designed for a DIY metal detector https://www.thingiverse.com/thing:2478864, avoiding an additional housing for the battery.
The inside diameter of the pipe must be somewhat 29 mm.
You will need:
- printed parts
- battery connectors (common type, can be found in several electronic shops)
- M3 threaded rod, about 1,5cm longer than your plastic parts
- 4x M3 nuts
- packing cord or a cable tie which will act as removal sling
Category: Electronics