1 / 2
Wet - Dry suction nozzle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated version, For wet & dry type of vacuum cleaners. Inner diameter is 35mm, thickness increased from 1.5 to 2.0mm,
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 157
- Makes
- 2
- Views
- 567
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
For wet & dry vacuum cleaners that don't come with a wet nozzle(mine didn't) this will work. Inner diameter is 35mm and about 110x10mm at the "suction end", check your's or modify accordingly, thickness increased from 1.5 to 2.0mm for a stronger nozzle(will probably last a long time even printed in PLA. mine are), smoothed out some corners. Will print without supports, a brim is recommended though