1 / 1
4 Powerbank Charging Station
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
redesigned larger version of my 3 powerbank stand
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 64
- Makes
- 0
- Views
- 290
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wasn't completely happy with my 3 powerbank stand, so I remixed it. It's taller and longer for powerbanks with a higher center of gravity. There's a crossmember in the middle of the model now so the banks can't fall out of the bottom if you pick the entire unit up. The holes in the side are larger for powerbanks whose charging ports are on the side.
Still prints fine with no support. Used Eryone PETG, .2mm layer height, 20% infill, 0.4mm nozzle. I wouldn't worry about more perimeters than 2, as the walls are somewhat thin, as-is.